Abstract
Fifth generation cellular technology reached initial commercial deployment through two distinct architectural paths. The Non - Standalone, commonly abbreviated NSA, architecture anchors a 5G New Radio carrier to an existing fourth generation Long Term Evolut ion Evolved Packet Core, allowing network operators to introduce 5G radio capacity quickly while control plane signaling continues to run through the established LTE core. The Standalone, commonly abbreviated SA, architecture instead connects the 5G New Ra dio directly to a native 5G Core Network, removing the LTE anchor entirely and enabling the full set of 5G core capabilities, including network slicing and ultra - reliable low - latency communication service profiles, that the NSA path cannot fully expose. Fo r connected automotive systems, which depend on consistent low latency and high reliability for cooperative driving, vehicle - to - everything safety messaging, and over - the - air software delivery, the choice between these two architectures carries direct opera tional consequences. This study presents a controlled, field - measured comparison of NSA and SA network performance and reliability as experienced by a connected vehicle test platform. Measurements were collected across five driving scenarios, stationary parking, highway cruisi ng, urban canyon driving, tunnel entry and exit, and dense intersection traffic, and across five vehicle speed bands ranging from stationary to one hundred thirty kilometers per hour. Four performance dimensions were evaluated: end - to - end application laten cy, downlink and uplink throughput, inter - cell handover latency and success rate, and vehicle - to - everything message delivery reliability. Across all evaluated scenarios, the SA architecture delivered materially lower end - to - end latency, averaging 13 milliseconds against 34 milliseconds for NSA, higher downlink throughput across every speed band tested, and a faster, more successful handover process, averaging 31 milliseconds against 68 milliseconds for NSA inter - cell handover completion. NSA retained an advantage in one respect, geographic coverage maturity, reflecting its reuse of the already dense LTE radio footprint, which produced a more consistent connection experience in rural and other lightly built - out SA coverage areas during the measurement period. The results suggest that connected automotive applications with strict latency or reliability requirements, including cooperative collision avoidance and remote vehicle operation, benefit measurably from SA connectivity where SA coverage is available, whil e NSA remains a practical interim choice in geographic areas where SA core deployment is still in progress. The paper discusses the architectural basis for these differences, presents the full measurement methodology and results, and offers deployment guid ance for automotive manufacturers and network operators planning connected vehicle rollouts during the ongoing transition from NSA to SA 5G infrastructure.
Keywords
5G New Radio, Non - Standalone architecture, Standalone architecture, connected vehicles, vehicle - to - everything communication, network latency, handover reliability, automotive telematics, ultra - reliable low - latency communication, network slicing.
References
[1] 3rd Generation Partnership Project. TS 37.340, Evolved Universal Terrestrial Radio Access (E-UTRA) and
NR, Multi-connectivity, Stage 2, Release 15. Sophia Antipolis: 3GPP, 2018.
[2] 3rd Generation Partnership Project. TS 23.501, System Architecture for the 5G System, Stage 2, Release 16.
Sophia Antipolis: 3GPP, 2019.
[3] 3rd Generation Partnership Project. TS 23.502, Procedures for the 5G System, Stage 2, Release 16. Sophia
Antipolis: 3GPP, 2019.
[4] 3rd Generation Partnership Project. TS 22.186, Service Requirements for Enhanced V2X Scenarios, Release
16. Sophia Antipolis: 3GPP, 2019.
[5] 3rd Generation Partnership Project. TR 38.913, Study on Scenarios and Requirements for Next Generation
Access Technologies, Release 15. Sophia Antipolis: 3GPP, 2018.
[6] Institute of Electrical and Electronics Engineers. IEEE 1609.3, Standard for Wireless Access in Vehicular
Environments, Networking Services. Piscataway, NJ: IEEE, 2016.
[7] Narayanan, A., Ramadan, E., Carpenter, J., Liu, Q., Liu, Y., Qian, F., and Zhang, Z. L. A First Look at
Commercial 5G Performance on Smartphones. Proceedings of The Web Conference 2020, Taipei, pp. 894
to 905, 2020.
[8] Xu, D., Zhou, A., Zhang, X., Wang, G., Liu, X., An, C., Shi, Y., Liu, L., and Ma, H. Understanding
Operational 5G, A First Measurement Study on Its Coverage, Performance and Energy Consumption.
Proceedings of the Annual Conference of the ACM Special Interest Group on Data Communication,
Virtual Event, pp. 479 to 494, 2020.
[9] Ford, R., Zhang, M., Mezzavilla, M., Dutta, S., Rangan, S., and Zorzi, M. Achieving Ultra-Low Latency in
5G Millimeter Wave Cellular Networks. IEEE Communications Magazine, vol. 55, no. 3, pp. 196 to 203,
2017.
[10] Shafi, M., Molisch, A. F., Smith, P. J., Haustein, T., Zhu, P., De Silva, P., Tufvesson, F., Benjebbour, A.,
and Wunder, G. 5G, A Tutorial Overview of Standards, Trials, Challenges, Deployment, and Practice.
IEEE Journal on Selected Areas in Communications, vol. 35, no. 6, pp. 1201 to 1221, 2017.
[11] Chen, S., Hu, J., Shi, Y., and Zhao, L. LTE-V, A TD-LTE-Based V2X Solution for Future Vehicular
Network. IEEE Internet of Things Journal, vol. 3, no. 6, pp. 997 to 1005, 2016.
NR, Multi-connectivity, Stage 2, Release 15. Sophia Antipolis: 3GPP, 2018.
[2] 3rd Generation Partnership Project. TS 23.501, System Architecture for the 5G System, Stage 2, Release 16.
Sophia Antipolis: 3GPP, 2019.
[3] 3rd Generation Partnership Project. TS 23.502, Procedures for the 5G System, Stage 2, Release 16. Sophia
Antipolis: 3GPP, 2019.
[4] 3rd Generation Partnership Project. TS 22.186, Service Requirements for Enhanced V2X Scenarios, Release
16. Sophia Antipolis: 3GPP, 2019.
[5] 3rd Generation Partnership Project. TR 38.913, Study on Scenarios and Requirements for Next Generation
Access Technologies, Release 15. Sophia Antipolis: 3GPP, 2018.
[6] Institute of Electrical and Electronics Engineers. IEEE 1609.3, Standard for Wireless Access in Vehicular
Environments, Networking Services. Piscataway, NJ: IEEE, 2016.
[7] Narayanan, A., Ramadan, E., Carpenter, J., Liu, Q., Liu, Y., Qian, F., and Zhang, Z. L. A First Look at
Commercial 5G Performance on Smartphones. Proceedings of The Web Conference 2020, Taipei, pp. 894
to 905, 2020.
[8] Xu, D., Zhou, A., Zhang, X., Wang, G., Liu, X., An, C., Shi, Y., Liu, L., and Ma, H. Understanding
Operational 5G, A First Measurement Study on Its Coverage, Performance and Energy Consumption.
Proceedings of the Annual Conference of the ACM Special Interest Group on Data Communication,
Virtual Event, pp. 479 to 494, 2020.
[9] Ford, R., Zhang, M., Mezzavilla, M., Dutta, S., Rangan, S., and Zorzi, M. Achieving Ultra-Low Latency in
5G Millimeter Wave Cellular Networks. IEEE Communications Magazine, vol. 55, no. 3, pp. 196 to 203,
2017.
[10] Shafi, M., Molisch, A. F., Smith, P. J., Haustein, T., Zhu, P., De Silva, P., Tufvesson, F., Benjebbour, A.,
and Wunder, G. 5G, A Tutorial Overview of Standards, Trials, Challenges, Deployment, and Practice.
IEEE Journal on Selected Areas in Communications, vol. 35, no. 6, pp. 1201 to 1221, 2017.
[11] Chen, S., Hu, J., Shi, Y., and Zhao, L. LTE-V, A TD-LTE-Based V2X Solution for Future Vehicular
Network. IEEE Internet of Things Journal, vol. 3, no. 6, pp. 997 to 1005, 2016.